rn STEERING 11 3 Luck System Continued Condition Possible Cause Correction HIGH EFFORT 5 Bent sector shaft 5 Replace shaft Continued 6 Defective rack 6 Replace rack 7 Remote rod restricted 7 Remove restriction 8 Bent remote rod 8 Straighten or replace 9 Ignition switch mounting 9 Straighten or replace bracket bent 10 Extreme misalignment of 10 Replace either or both housing to cover tilt column 11 Distorted coupling slot in rack 11 Replace rack tilt column WILL STICK 1 Remote rod deformed 1 Straighten or replace IN START 2 Any high effort condition 2 Check items under high effort KEY CANNOT BE 1 Ignition switch is not set 1 Readjust REMOVED IN correctly OFF LOCK 2 Defective lock cylinder 2 Replace lock cylinder LOCK CYLINDER 1 Lock cylinder with defective 1 Replace lock cylinder CAN BE REMOVED retainer WITHOUT DEPRES SING RETAINER 2 Lock cylinder retainer missing 2 Replace lock cylinder 3 Burr over retainer slot in 3 Remove burr housing cover HIGH EFFORT ON 1 Distorted rack 1 Replace rack LOCK CYLINDER BETWEEN OFF 2 Burr on tang of shift gate 2 Remove burr AND OFF LOCK automatic column 3 Linkage not adjusted 3 Adjust linkage LOCK BOLT HITS 1 Ignition switch is not adjusted 1 Adjust ignition switch SHAFT LOCK IN correctly all except tilt column OFF POSITION